FAQ

Many users like using quarantine locks precisely because they feel good about using them. So how do branded products satisfy users? First is that it can have very good convenience in use, both locks to carry on, or on the stick a card can be customized, and so on, also can make the user feel convenience, only will truly let users like convenience products, brand manufacturers not only have better optimization in production, as well as to better design of products, Naturally, users can feel the convenience of the product.

Moreover, even in the use of isolation lock process, also has a very good product stability. For locks, it is also hoped that it has good stability, only stability will let users rest assured, will let users use more trouble. There are also some products in the market when there is no corresponding adaptability, in the process of use from time to time will appear can not open, or is locked and so on, and in this case, it is difficult to let users have a good satisfaction. And the brand is precisely because of the higher process requirements in production, it will naturally make users satisfied.

At the same time, brand manufacturers also attach importance to the humanization of the use of products, and can be customized according to the needs of users. Just because of this, the products will have good quality. Some small manufacturers because they have their own strength is insufficient, naturally when the user uses, it is difficult to achieve the requirements of this respect. Some users are used in special environments, and some users do not find their own satisfactory products in the market. If it is a brand manufacturer, users can be satisfied, while non-brands are often difficult to make users satisfied in this respect.

Only when the manufacturer has an advantage in the production of isolation lock, will the product have quality assurance, so which manufacturer has more production advantage? A manufacturer is not a production advantage, the first thing to see manufacturers have what kind of market sales. There are a lot of users to buy this product, often will be carried out on the Internet, and on the Internet can also be on the manufacturer’s product sales to check, only a manufacturer of products by the user’s like, will have a good sales, so when the user chooses the manufacturer, it is necessary to see what kind of sales at home.

Only in this way the factory will have a better production advantage, is also a manufacturer has production advantages, also want to see what kind of qualifications, the lock looks simple, but it is not easy, it requires higher production technology and technical requirements, only the corresponding improvements in this aspect, just can have various strength, such as its what 捰 in production, Again, is what kind of technology and so on. So when the user chooses this kind of manufacturer, it is best to choose the old brand manufacturer.

At the same time, when users choose isolation lock, they also need to see what kind of scale manufacturers have. No matter what time, it is also a good production advantage of large manufacturers. Not only is the strength of large manufacturers more comprehensive, but he also has good regularity in production. Small manufacturers often because of its in the production of no corresponding formal, will let users do not put their mind when using, because in the absence of formal premise, often will let users have a better satisfaction when using, so relatively speaking, this is also very important. Only large manufacturers will have better production advantages, will truly ensure the quality of products.

Safety locks are generally used when they are in close proximity to the equipment for repair or maintenance to prevent accidental injuries.

When should safety locks be used?

Safety locks must be used on the following occasions:

1. In case of sudden startup of equipment, safety locks should be used to lock the listing

2, to prevent the sudden release of residual power, it is best to use safety locks:

3. Safety locks should be used when it is necessary to remove or pass through protective devices or other safety facilities

4, when a part of the body may be seized by the machine should be locked working scope:

5, power maintenance personnel in circuit maintenance, should use safety locks on the open equipment

6, machine maintenance personnel should use safety locks on the machine switch button when cleaning or lubricating the machine with moving parts

7. Maintenance Personnel should use safety locks for mechanical equipment when troubleshooting mechanical failures. The U.S. Occupational Safety and Health Administration (OSHA) recommends that all businesses equip their employees with safety locks. Within the workplace, it is the responsibility of the enterprise to keep track of the system chosen to be used. A safety lock is not a tool for disabling power and can only be used when the power source is isolated.

I believe that the word safety is not strange to everyone, so what is industrial production safety? As a safety lock manufacturer, today doctor safety to you to popularize the little knowledge of industrial safety production.

First of all, safety consciousness is the concept that production must be safe established in people’s minds, that is, people in production activities may cause harm to themselves or others in a variety of external environmental conditions, a kind of alert and alert psychological state. Production safety refers to the personal safety, equipment safety, product safety and transportation safety in industrial production. It follows the policy of “safety first, prevention first”, with the standard of not hurting others, not hurting themselves, not being hurt by others.

1. Three violations in production safety:

(1) Violation of rules and regulations; (2) Illegal operation; (3) Illegal command.

2. There are three main reasons for unsafe behaviors:

① Do not know the correct operation method; (2) Develop correct operation methods but omit necessary steps to save trouble; ③ Operate according to your own habits.

3. The six most common psychological states affecting the safety of enterprise employees:

① Self-expression psychology; ② Empirical psychology; ③ Fluke psychology; ④ Herd mentality ⑤ abnormal psychology; ⑥ Reverse psychology.

4, seven characteristics of production safety accidents:

① Causality; ② accidental; ③ Inevitability; ④ Potential; (5) reproducibility; ⑥ Predictability; ⑦ Regularity.

5, safe production “four must” :

(1) Everyone must pay attention to safety: not only to pay attention to their own safety, but also pay attention to the safety of others, and other kinds of security risks.

(2) everything must pay attention to safety: do anything to pay attention to safety, do not ignore safety because of proficiency.

(3) must always pay attention to safety: do not speed up because of work in a hurry, illegal operation, ignore safety.

(4) Pay attention to safety everywhere: Pay attention to safety everywhere.

BOZZYS safety products (tel: 0577-57123009) specializes in providing safety padlock, safety, safety cable lock, safety,

Circuit breaker switch lock, lock management station and other supporting facilities solutions, committed to the safety concept of prevention first, locking safety second, lockout lock

A complete range of cost-effective, considerate after-sales service, welcome to join!

Generally ABS engineering plastic, and civil padlock is generally metal;

The main purpose of the security padlock is to warn but not to guard against theft. The main purpose of the common civilian padlock is to guard against theft.

The lock beam of the security padlock can not automatically spring open and has the function of keeping a key, while the ordinary civilian padlock is just the opposite.

General civilian padlock is generally a lock with a key, and security padlock general padlock can be equipped with more than one key, divided into management lock and common lock;

Safety padlocks are often exposed to acid and alkali environments and require special treatment, while general civilian padlocks are not usually used.

(1) High-pressure operations (including operations near high-voltage lines);

(2) Work on live equipment;

(3) All work requiring temporary shutdown of the safety system;

(4) Entering a confined space (including operations in any area at risk of hypoxia);

(5) Work that may be exposed to harmful substances;

(6) In non-designated areas of hot work (cutting, welding);

(7) Work at height and in deep pits;

(8) Demolition work;

(9) All excavation operations include work in the vicinity of underground pipes and underground cables;

(10) Operations on radioactive source equipment.